Overlord (Plane and Tank) [Wheels CT-02: Wreck n' Rule]

@robfromzonebase Overlord (plane and tank) [Transformers Blokees Wheels CO2- Wreck 'n Rule] #zonebase #transformers #blokees #blokeestransformers ##blindbox ♬ Catcat Heaven - The Lethal Weapons

I know I talk about "back in the day" a lot around here, but I'm going to do it again for just a minute.

Overlord is one of those really big-deal Transformers characters. No matter how many toys get made of him, every new release feels like an event. That goes all the way back to his introduction in Transformers: Masterforce as one of the series' original characters and toys. Aside from a European release of the original figure, Overlord didn't really get a worldwide release until around 2003, when his Super Collection Figure PVC was released under Hasbro's Heroes of Cybertron line named Powermaster Gigatron. Even then, it was pretty much a one-off until Overlord exploded in popularity thanks to Last Stand of the Wreckers in 2010. That IDW incarnation won over a whole new generation of fans and has led to a steady stream of new toys ever since.

Today we're looking at the Plane and Tank kits from Blokees Transformers Wheels CT-02: Wreck n' Rule.

It's been a little while since I've talked about a Blokees Wheels kit here, and honestly, I've built up a bit of a backlog. Thanks to the move, I've still got most of CT-02 sitting unbuilt and CT-03 completely untouched. Like a few other things I've yet to cover here, expect the TikTok and Instagram pages to suddenly get flooded with assembled Wheels kits. I hate to be one of those guys, but if you'd like to follow me over there, I'd really appreciate it. Those pages have become an extension of Zone Base and are a fun way to share things that don't always become full blog posts.

For those unfamiliar with them, the Wheels series focuses entirely on vehicle modes. In the case of Transformers, that means building the alternate modes instead of the robots. It's a surprisingly fun twist, and while they share some similarities with the Defender Version vehicle kits, they're definitely their own thing.

The tank is a simpler build than the plane, although I did struggle with the instructions a bit. Like the Defender Version kits, Wheels uses those tiny instruction cards, and sometimes the illustrations are just a little too small to make out clearly. For the most part I did fine, but the Universal Chassis Connector, the rear tread assembly, and one tiny black piece that fits beneath the turret all had me scratching my head for a few minutes. Once everything finally clicked together, though... it just worked.

The tank also uses some of that wonderfully satisfying Solidex, which immediately made me forget any frustration I'd had. I really do appreciate that stuff.

The plane, unfortunately, doesn't use any Solidex.

Blokees...

Why?

I honestly can't even tell you exactly where it would have been useful. I just know I'd have appreciated more of that magical material. What if they made an entire kit out of Solidex?

Whoa.

The jet itself assembles fairly easily. Once again, I stumbled a little on the Universal Chassis Connector, though I have to admit that's mostly a me problem. I seem to trip over that step on almost every Wheels kit I build, so I can only blame the instructions so much. If the Universal Chassis System were made of Solidex, I'd probably get it right every time.

My only real complaint with the plane is the landing gear. It's awesome that they included working landing gear, but the pieces have a tendency to pop off pretty easily.

It's also worth mentioning that these kits represent the IDW Comics version of Overlord rather than his original G1 design. The tank isn't dramatically different, but the jet is much sleeker and honestly looks like something straight out of a 16-bit shooter.

Everyone take a shot.

I compared a toy to a non-related video game.

Of course, these kits don't combine into Overlord's robot mode or city mode.

They do, however, combine into two different super jets that I think look absolutely fantastic.

You can replace the tank's treads with the plane's wings to create one heavy duty looking fighter, or attach the treads to the jet itself before combining everything into a much larger super aircraft. Once again, my brain immediately goes to old shooter games. These things just have that aesthetic. I'm convinced they'd have starred in some long-forgotten multi-platform shooter with several sequels, brutal difficulty, and incredible music.

Naturally, the CD-ROM version would have fully animated cutscenes.

I've probably spent way too much time on that analogy, but that's honestly how strongly these designs hit that part of my brain.

Speaking of the designs, Overlord's classic black and teal color scheme looks absolutely fantastic on these kits. They're sharp-looking models, and while I understand that blind-box packaging makes special editions a little less practical, I'd still love to see alternate versions someday. Cast them in translucent plastic. Give them metallic paint. Throw some glitter in there.

The possibilities are endless.

Awesome job, Blokees.

SG Sideswipe [Wheels 02-Wreck 'N Rule]

The Shattered Glass version of Sideswipe is one of those characters that's just chock full of Transformers trivia. On the surface, he looks like a version of Sideswipe who left the Autobots and joined the Decepticons (you could say he swiped sides). I've explained it before, but let's see if I can do it in a shorter version.

Originally there was a toy in Transformers Armada named Wheeljack who looked like traditional Sideswipe and had left the Autobots to join the Decepticons. Meanwhile, there was also a character named Sideswipe... who didn't look like traditional Sideswipe. It was a weird time.

Then in the early 2000's version of Transformers Universe, there were plans to use that Armada Wheeljack mold as a new version of G2 Drench. I had always liked G2 Drench's colors and loved the Armada Wheeljack toy, so I was super excited about this at the time. Unfortunately, it was canceled. A few years later, when Shattered Glass was introduced as a BotCon exclusive, Sideswipe made from the Armada Wheeljack mold in that canceled Drench deco was released. Needless to say, I was a fast fan.

I think the only version of SG Sideswipe I don't own is the Generations Selects version that I really should get. I clearly wasn't his only fan either as Sho Utsumi from SSSS.Gridman is heavily patterned after SG Sideswipe. Actually, most of the cast in that show is modeled after Transformers characters, which is pretty neat.

This incarnation of SG Sideswipe is from Blokees Transformers Wheels Series 02-Wreck 'N Rule. A 1/64 scale model of his vehicle mode. It's pleasantly small and the Solidex is satisfyingly used for the main car body shell. Really, the colors pop as it just looks so sharp.

The kit came together well. The universal chassis all Wheels kits seem to share connects to a skid plate type piece and everything builds up from there. A Blokees driver can fit inside the car's interior nicely and probably most Inchman style figures could as well. I'm moving, so I don't have time to experiment with this currently, but I really want to stick a Micro Galaxy Squadron Storm Trooper in there.

SG Sideswipe shares a mold with the Blokees Wheels Breakdown who is in the same series. I'll definitely be talking about Breakdown a little later as I assume the Stunticons will eventually be represented fully as Wheels kits.

Ultimately, this is a very slick looking little car and another great Wheels kit.

Ironfist [Wheels 02-Wreck 'N Rule]

The first kit I assembled from the Blokees Transformers Wheels Series 02-Wreck 'N Rule was this one, Ironfist. I'm not going to act like I'm Ironfist's biggest fan, but it's hard not to like him. I've gone over some of the confusion surrounding his original toy in another post from earlier this year. It's honestly hard for me not to remember all of that whenever thinking about him.

This Ironfist is another non-transforming blind boxed model kit from Blokees, who at this point are the main focus of my Transformers buying. Wheels of course represent the alternate modes of Transformers characters, and this one is firmly based on his appearance in the IDW comics where he's most popular.

What draws me to this the most is the resemblance to a Diaclone vehicle. I just want a fleet of these piloted by Dianauts. I can imagine that's possible too, as there's a little cockpit up front intended for a Blokees driver to pilot the vehicle.

This was one of the easier to assemble Wheels kits I've come across. Even with the small instructions that I sometimes have trouble with, I was able to snap everything together within minutes. The only trouble I had was these little bits that go between the wheels. Initially, I wasn't sure which way they were meant to be positioned as it wasn't very clear in the instructions. However, it became pretty obvious when I just looked at the damn thing. That was one of those moments where I said "oh... yeah" out loud and then looked around to see if anyone saw that. Thankfully I was alone at the moment. Something like that would go on my permanent record.

A nice touch is the cannon turret moves a little when the ammo drum is turned. That whole section can also be moved around so that Ironfist can aim his gun as well. I didn't notice any Solidex pieces in his construction disappointingly, but thankfully the vehicle is nice enough to excuse its absence. Seriously, I love Solidex.

Swerve and Gears [Wheels 01–Roll Out]

Swerve and Gears are a fun pair to look at together.

Originally, Swerve was a repaint and slight retool of Gears in the original Transformers toy line. Gears himself comes from a Microman Microchange mold, which in turn traces back to an unused Mysterians concept. There’s a lot of toy history baked into these two.

Now with Blokees Wheels, things come full circle. They’re clearly built from the same base, but this time they’re released together in the same blind box series instead of one being an afterthought repaint.

Personally, I’ve always preferred Swerve’s toy, but I like Gears’ character more. That mostly comes from their appearances in the original cartoon—Swerve barely gets a personality, while Gears gets a whole episode dedicated to being a grumpy ass.

Meanwhile, Swerve went on to become a fan-favorite in the IDW comics, and it’s his Cybertronian vehicle mode that this Wheels version is based on. Gears ends up being the repaint/retool here.

Blokees really did bring it all the way back around.

Even though they share a lot of parts, there are some nice differences beyond just color.

Swerve comes with his “My First Blaster” gun, which can mount on the rear of the vehicle. I really like how that looks—it actually reminds me a bit of the Sophia from Blaster Master. If you don’t want to use the weapon, there’s an alternate rear panel that gives him a cleaner look, closer to his original G1 toy.

Gears, on the other hand, leans more rugged. He’s got a roll cage with a spare tire, which gives him a totally different silhouette. He also includes a rocket exhaust effect piece that attaches after removing the rear bumper.

It’s impressive how something as simple as alternate rear sections and color choices can make two nearly identical builds feel so distinct.

The builds themselves are very similar, of course. The Wheels line uses a universal chassis system, so once you’ve done one, you’ve basically got the foundation for all of them. It makes assembly quick and pretty satisfying.

That said, the instructions are printed on the back of the included mini trading cards, and they can be a little hard to read. I’m honestly considering picking up a small magnifying glass for my modeling kit. Maybe Daiso has something like that—I take a weird amount of pride in grabbing medeling tools from there.

One thing I really like is that parts of the rear section are made from Solidex, giving them that satisfying die-cast feel. It adds a nice bit of weight and makes them feel a little more premium than you’d expect.

Both vehicles have opening canopies, although from what I understand, the Blokees driver figures don’t actually fit inside. That’s a little odd and I haven’t tried it myself yet. Maybe something like another Inchman style figure would work better.

It’s funny—I didn’t expect to enjoy the Wheels line as much as I do. As I’m writing this, I’ve got a box of Series 2 on the way and I’m basically chomping at the bit to get into it.

Blokees has clearly cast some kind of spell on me… and I’m not even trying to resist it.

Optimus Prime Trailer Set [CT01]

I’m having a hard time putting into words just how smitten I’ve unexpectedly become with Blokees Wheels. What started as a fun sideline to the kits I’ve loved over the past few years has grown into something all its own. This Optimus Prime with Trailer kit is a fun release outside the regular blind box Wheels line and a neat set by itself.

Think of it as a special edition of the Optimus Prime from 01-Roll Out — essentially the same cab, just upgraded. The cab is the standard Optimus Prime with a Solidex body, giving it that satisfying heft. In addition to the wind deflector, there’s an alternate pair of smokestacks (originally from the Titanium Edition) that you can swap in for a more classic appearance, as opposed to the IDW-inspired design of the standard version. Another upgrade is the dual wheels for the rear section of the truck — a small difference, but one that makes a bigger impact than you’d think. For a more in-depth look at the cab’s intricacies, check out the Hologram Edition we talked about a few weeks ago. For now, I want to focus on the trailer, which really sets this set apart.

The trailer is a faithful replica of Optimus’s classic trailer and is compatible with the prior blind box editions. It opens up to reveal the classic Combat Deck mode, complete with Roller and the Combat Deck robot, which can attach to Roller as well. The trailer’s shiny silver color pops visually and pairs perfectly with Optimus’s classic colors, plus the blue of Roller and the Combat Deck robot. Assembly is easy — it’s practically a clamshell — and the dual tires on the axle are a nice touch. It also includes the stabilizers from the original toy: little legs that fold out to support the Combat Deck and provide extra stability. I don’t know why, but I really appreciate that attention to detail.

Roller assembles easily and can seat a Blokees driver figure or another Inchman. I’d love to speculate that a Diaclone driver might fit, but it’s a bit small. The Combat Deck robot can raise up on its stand or fold into a compact form. It’s got an articulated radar dish and claw arm, recreating the original toy and giving it that classic robot charm. There’s also room for about three regular Wheelies vehicles inside the trailer (without Roller), adding even more fun.

There’s a real thrill to playing around with the trailer, which admittedly is a little silly given how many variations of Optimus’s trailer I’ve owned over the years. Still, this set is neat, and the overall package makes a fantastic addition to my Blokees Wheels fleet.

Megatron [Wheels 01 – Roll Out]

I’ve been meaning to talk about this particular Megatron from Blokees Wheels Series 1 – Roll Out since assembling him. It’s one of the larger kits in the series, and it’s pretty damn impressive. Unfortunately, having more parts apparently means no Solidex pieces like the regular-sized kits include. That’s unfortunate, as that would have been especially nice on Megatron considering his design.

Megatron is based on his appearance in IDW’s Stormbringer comics, a design by Don Figueroa that gives the Decepticon leader a pretty cool-looking tank alt mode. Thankfully, the turret articulates with a satisfying click, which keeps it in place when posing instead of spinning freely, as is often the case with tank toys. It can also be removed to allow a driver to be placed inside.

The detailing and colors create a sharp-looking little tank that I could easily see blending into a Diaclone battle scene.

Wheels kits are generally pretty easy to assemble; however, each kit’s instructions are presented in the same format as a Defender Class, printed on the back of the mini trading card included with the kit. For a Defender, that’s not a problem, but Wheels kits have more parts, and it can sometimes be tricky to determine the correct orientation from the smaller diagrams. After assembling Megatron’s front treads, I think investing in a magnifying glass for future builds might be in order.

It’s a minor quibble that doesn’t result in a lesser product, so it’s not actually a real issue. Overall, despite how much better Solidex would have made Megatron, he has a very satisfying build process, and the final product is pretty impressive.

Optimus Prime (Hologram Edition) [Wheels 01 – Roll Out]

It’s honestly a little wild that it’s taken me this long to start talking about Blokees Wheels here on Zone Base. Wheels is another blind-boxed Blokees series, similar to the Galaxy and Defender versions I’ve covered for years, but this time the focus is on vehicular models.

Since we’re looking at Transformers Wheels kits, these represent the alt modes rather than the robots themselves.

Like the other Blokees lines, each wave includes chase versions. Following the Defender Version format, buying a full box guarantees at least one chase. And just like the Defenders, the chase is an alternate version of one of the regular figures in the wave.

Today we’re looking at the Hologram Edition of Optimus Prime.

In this wave, you could pull a standard Optimus, the Hologram Edition (translucent), or a Titanium Edition with metallic paint. The standard Wheels kits include at least one part cast in Solidex—a material designed to look and feel like die-cast metal. It’s not actual metal, but it has that same satisfying heft, similar to what you’d find in a Hot Wheels car. It gives the finished model a really nice weight.

The chase figures skip the Solidex component and instead include an Inchman-style driver figure that can pilot the Wheels vehicles. That’s a pretty neat trade-off.

Optimus here is based on his IDW Comics design from around 2009–2011. It’s very close to the classic flat-nosed truck we all know, but with a bit of added flair in the form of a wind deflector and sporty striping. It’s a strong look. And regardless of which version you pull, it’s compatible with the separate Wheels Optimus Prime truck and trailer set, since it uses the same truck model.

The chassis appears to use a universal system across the Wheels line, which should make customization pretty straightforward.

What makes the Hologram Edition stand out, of course, is the translucent plastic. While the chassis and chrome-painted grille remain opaque, most of the body is cast in clear plastic, giving it a sharp, almost ethereal presence. I’ll admit, I think I prefer this version. I’ve always had a soft spot for colorful translucent plastic, and since I plan on picking up the truck and trailer set later, this version will make for a really nice visual contrast.

The included driver is a fun bonus. Cast in a pleasant blue translucent plastic, it almost feels like a literal hologram operating the vehicle while the robots are in disguise. You do have to assemble it yourself, and it’s tiny—so it was a little fiddly. Interestingly, there are two torso and waist pieces on the sprue, but only one set of limbs. Once assembled, though, the driver has just enough articulation to fit into pretty much any Wheels cockpit.

I really like what Blokees is doing with Wheels, and you can absolutely expect to see more of them here in the future.