Bumblebee (Devastation) [Studio Series/Deluxe Class]

Transformers: Devastation was one of those games that came in hot, got a ton of fanfare, and then kind of slipped into obscurity. Lately it’s been getting a bit more attention again, and I’m pretty happy to see that version of Bumblebee finally get a toy.

Admittedly, it’s still your standard Bumblebee at its core—but I like this variation a lot.

Instead of the classic VW Bug, he’s got that sporty hatchback look, which I’ve always felt was a great modern equivalent. Add in the cell-shaded style deco, and it ends up being a pretty slick take on a familiar design.

A big part of why I like this one is how much it resembles the 2006 Transformers Classics Bumblebee, which served as a base for his design in the game. Even 20 years later, Classics is still a high point for me, so that connection goes a long way.

I initially thought this might be a retool of the Studio Series 86 Bumblebee, but that doesn’t seem to be the case. In robot mode, he’s armed with twin blasters like in the game, along with a larger vehicle-mode blaster mounted on his back. It gives him a much more aggressive look than you’d normally expect from a “kid appeal” character.

Transformation is pretty straightforward, though some of the parts fit a bit tight. Be careful when folding the head into place—I’ve seen reports that the molded copyright info can scrape the paint on his nose.

In vehicle mode, he turns into a clean little hatchback. The large blaster mounts on the roof, with the smaller ones on the sides for a bit of vehicular combat flair.

Overall, this is a simple, solid figure. Good articulation, decent firepower, and a really nice-looking alt mode. The cel-shaded deco does a lot of the heavy lifting, and I’m just happy to have a strong take on Bumblebee from a game that deserves a little more love.

Carnivac w/ Survivor [Age of the Primes / Wreck ’N Doom Collection]

Carnivac is a really cool addition to the Age of the Primes series. He’s the main reason I wanted the two-pack he comes in alongside Fisitron, who I talked about earlier this week. Carnivac is another somewhat obscure Transformers character. He’s featured more heavily in various comics, but exists just under the surface enough that mainstream audiences—and even some fans—may not be aware of his existence.

His biggest role is in the Marvel UK comics, where he was featured regularly. Similar to Dinobot in Beast Wars, Carnivac was a Decepticon whose own sense of right and wrong led him to become a more heroic character. Eventually, after a major event, surviving Autobots and Decepticons formed a new group known as The Survivors, which later led to another group known as Earthforce. I particularly enjoy those issues. 

This is Carnivac’s second official toy to date, the first being a Pretender. This time around, he’s a Headmaster with a new partner named Survivor.

I don’t know if Carnivac being a Headmaster instead of a Pretender rubs anyone the wrong way, but I love it. I love Pretenders, but Headmasters hit a particularly sweet spot for me. Not to mention, he looks a lot like the inner robot from his original toy—which is how I’m used to seeing him anyway from those UK comics.

Also worth noting: my own G1 Carnivac is missing his Pretender shell. I picked up the inner robot for practically nothing from a dump bin at Charticon, so I’m just accustomed to seeing him that way. Another sweet spot for me is that they used a Titans Return mold as a base, which is absolutely one of my favorite Transformers series. This one is hitting all the right chords for me.

Oddly enough, the Takara version has the Headmaster as Carnivac himself, with the main body intended to represent his Pretender shell.

As mentioned, Carnivac is made from a Titans Return mold—specifically Wolfwire/Weirdwolf. There’s only a small amount of new tooling here. He gets a new wolf tail that becomes a sword in robot mode, along with a blaster. Survivor has a new faceplate for head mode, tooled after Carnivac’s appearance in Time Wars. I really like that—he looks almost straight off the comic page and makes me want to dig my copy out and re-read it.

Outside of that, Wolfwire/Weirdwolf makes a solid base for a very well-done Carnivac update. Despite the mold being about ten years old, it still looks great. Carnivac’s mix of metallic purple, green, and copper looks fantastic and makes the whole thing feel like a more premium offering.

Robot mode offers a decent amount of articulation—more than his boxy looks would suggest. When Titans Return first came out, many described it as “G1 with knees,” which is clearly something people still love, as Missing Link has proven. Combined with his new face sculpt, Carnivac is really expressive. He just oozes attitude, and I love it.

Transformation is very straightforward. Pop the head off and fold the beast-mode head over. You essentially lay him down and adjust the arms and legs into the wolf’s legs. The sword becomes the tail, and his gun mounts on the back for some canine firepower.

Survivor can unfold into his humanoid mode and hang out, or fit into a cockpit on the wolf’s back. He doesn’t slide in as smoothly as you might expect—you’ll basically need to have him in head mode to fit properly—but once he’s in, it’s a snug fit.

It’s impossible for me not to get Zoids vibes from this, though I get that from other beast-mode Headmasters as well. I also get slight Beast Machines vibes, specifically from the legs and transformation, which heavily remind me of Night Slash Cheetor. I always liked that toy, and while this isn’t the same thing exactly, there are enough similarities to make the connection.

Every use of this mold that I’ve picked up has been pretty great, and as Carnivac it really excels. It’s funny how a toy meant to update one character can work so perfectly for another. This is one of those toys that gets me excited and happy in that fanboy way that’s hard to explain to people who don’t get it.

This two-pack is pretty great overall. I might be tempted to grab the other Wreck ’N Doom Collection sets—but I also feel like I already have the star of the show.

Fisitron [Age of the Primes / Wreck ’N Doom Collection]

Back in the day, Ironfist was a bit of a Mandela Effect for many Transformers fans. He was released late in G1 in European markets, in that gray area between G1 and G2 often called G1.5 by many fans. Like many other G1.5 toys, he was also released in G2. This tends to be confusing, as everything is pretty identical and G1.5 toys are often lumped into G2. To be fair, it is a bit confusing.

Adding to his Mandela Effect–ness, he’s often been confused for an Ironhide toy. This is due to the fact that the Generation 2 Power Master Ironhide toy has a similar alt mode, and obviously the names are similar as well. At some point he was redubbed Fisitron. This cuts down on the confusion—not only is it similar to Ironhide, but there’s also a Marvel superhero named Iron Fist. Fortunately, that one doesn’t have an alt mode.

Fisitron comes in a 2-pack with Carnivac (we’ll be looking at him a little later) as part of the Amazon-exclusive Wreck ’N Doom Collection. The name plays up Fisitron’s role in Last Stand of the Wreckers. This 2-pack was one of my Christmas gifts from the Mrs. this past year, and I was pretty excited to get it.

Fisitron hadn’t really appeared in any official Transformers fiction outside of a toy bio until around 2010, when he showed up in both IDW’s The Last Stand of the Wreckers and Fun Publications’ Wings Universe stories. He’s got two distinctly different personalities in each, though I tend to favor the Wings Universe incarnation. I’m a cartoon guy, and the G1 cartoon is my preferred fiction for these GeeWun bots; Wings Universe is set in an alternate version of the classic cartoon.

Not to mention, he’s a gun nut there, and I absolutely cannot not associate Fisitron with Doom Guy / Doom Slayer due to his appearance in this toy. The Wreck ’N Doom Collection name doesn’t hurt either, as you’re all well aware I enjoy playing Doom for hours on end. For what it’s worth, it’s hard not to love Fisitron in Last Stand of the Wreckers as well—I’m just more of a cartoon guy.

Fisitron is a pretty extensive retool of the Legacy: Evolution Detritus toy we looked at a little while back. I enjoyed that figure quite a bit, but I can honestly say I like Fisitron a whole lot better. The new parts really upgrade the mold for the better. I’ll be focusing on Fisitron in this post and his differences, so feel free to check out my take on Detritus in his post.

This version of Fisitron is a combination of his different designs. There’s a mix of the G1/G2 toy along with his IDW and Wings Universe looks. It makes for one attractive toy, though I do find his mostly gray alt mode funny, as it resembles that G2 Ironhide a bit. It never ends.

Fisitron has a new head that, of course, resembles him instead of Detritus. Most notable are the new roof and windshield areas, which cleverly change a Jeep into an armored truck. Is that called a canopy? I have no clue. If I were an influencer, I’d say “let me know in the comments” (cringe).

Speaking of that vehicle roof area (maybe it is a canopy, who knows), they’ve added some new parts that are removable and can be used in robot mode.

Those parts resemble the original Ironfist’s Lightformer gear when in vehicle mode. Unfortunately, they don’t form a cannon like the original does, but I appreciate the effort. The parts can be removed from the roof (can we call it a canopy?) and used in robot mode. Well, the laser gun can, obviously. But also the round dish-like thing—whatever the hell it’s supposed to be—can be removed and used as a shield if one so chooses.

The other portion remains as a backpack, which is where I chose to leave mine’s dish-like thing in this post’s pictures. It never occurred to me that it could be a shield; you don’t have to let me know in the comments. The laser makes for a nice rifle, with a bright yellow that contrasts nicely against Fisitron’s grays, blues, and copper colors.

I really like this toy—more than I thought I would going in. Detritus was already a good toy, making a solid base for the new parts to improve on. It’s like that extra pass over the mold provided room for improvement. Not to mention, Fisitron just looks sharp.

It’s a great-looking figure of a formerly obscure character who, despite a little time in the limelight, seems to be slipping back into obscurity. Hopefully this great figure inspires future uses of him in Transformers media.

Horri-Bull w/ Kreb [Age of the Primes/Target Exclusive 4-Pack]

Horri-Bull’s eyes opened. In front of him stood his partner, Kreb.

“What’s today?”

“EH?” returned the Nebulon, with all his might of spite. 

“What’s today, asshole?” said Horri-Bull.

“Today…” replied Kreb. “…it’s Christmas.”

“It’s Christmas Day!” said Horri-Bull to himself. “I haven’t missed it. The Spirits have done it all in one night. They can do anything they like. Of course they can. But so can I… HEAD ON!”

He had no further interaction with Spirits, but lived upon the ways of the Decepticon regardless, ever afterwards; and it was always said of him that he knew how to stop Christmas, if any bot alive possessed the knowledge. And so, as Tiny Tim observed, Take cover, everyone!

One thing I’ve grown to really appreciate about these Target Exclusive 4-Packs is the Headmasters created for the sets. Almost each time, there’s an updated classic Headmaster character creatively made from a Titans Return toy mold. This time we’ve got Horri-Bull, made from Titans Return Skullsmasher/Skullcruncher in a very clever remold. Actually, all of these Headmasters in the 4-Packs have been very clever remolds, and I’m thinking a look at ones I haven’t covered here on the site is in order.

Horri-Bull is known as Bullhorn in Masterforce, so if you’d rather use him as Bullhorn… go right ahead. I’m forever delighted by pun-based names, so I’ll stick with Horri-Bull. I don’t believe I covered Skullsmasher/Skullcruncher here on the site, which is another thing I should probably go back and do. I’ve also been considering an in-depth look at the Titan Masters from Titans Return, but for now, let’s look at our grumpy star of the season.

Horri-Bull is a pleasantly articulated toy that’s wonderfully blocky and chonky in the vein of classic G1 Transformers. Skullsmasher was a great base to use, as his basic silhouette isn’t all that different from Horri-Bull’s to begin with. Really, it’s his head, colors, and beast mode kibble that make the visual difference. This was seemingly easy (or as easy as new parts are probably still an undertaking) to accomplish, with the bull monster head and claws being new parts and Skullsmasher’s alligator tail being removed.

Also remolded is his chest, which you might think is missing a cover for the Headmaster technical data, but this is true to his original toy. Considering Titans Return toys were originally released almost a decade ago, the mold has held up pretty well, though his arms did feel a little loose. I’m guessing the mold got a bit of refurbishing with this update, but time still seems to be catching up. With his cool late-G1 colors, he looks great. I’ve always been a sucker for those post-movie Decepticon palettes.

He’s got both his Concussion Blaster and the beast mode tail, which becomes a double-barreled flamethrower. The two guns can be combined or held separately.

In beast mode, Horri-Bull is a cross between a bull and the Terror Dogs from Ghostbusters. So really, he’s a robotic incarnation of the Hodag in wonderful colors. Transformation is pretty easy: remove Kreb and fold the beast head into place. Arms and legs become the monster’s legs, and the robot mode feet fold around the upper thighs, becoming the beast’s rear end. As mentioned above, the two guns combine to form a tail.

Beast mode is simple but effective. The legs can move, most notably the front ones, and the jaws on his head can open for a little chomping action. Speaking of that head, the horns will need to be moved around a bit for the proper look in both robot and beast modes. They’re separate pieces that need to be clipped from sprues out of the package. The horns are also painted, so there will always be a small spot left from clipping unless you touch it up with paint.

Of course, Kreb can pilot Horri-Bull in this form via a cockpit on his back. I’ve always really liked that feature on Headmasters. Kreb himself is a remold of Grax (Skullsmasher’s Titan Master). I do wonder why they didn’t use the individual Titan Master Terri-Bull for this project. Maybe the mold wasn’t available? Weird.

Regardless, the whole package is another well-done Headmaster update pulled off in these 4-Packs. They’re really the highlight of each set for me, and I’ve always been especially fond of the Headmasters from Masterforce. All in all, this year’s set has been a really good one, and as always, I’m ecstatic to have it.

Primus bless us, everyone...RUN!

Ultra Magnus [Age of the Primes/Target Exclusive 4-Pack]

"Come in! Come in, and know me better, mech!"

The grumpy one entered timidly and hung his head before this Spirit. He was not the dogged grumpy mech he had been; and though its eyes were clear and kind, he did not like to meet them.

"I am the Ghost of Christmas Present," said the Spirit. "We have matters to deal with now."

I’ve said it before, but it’s worth saying again: Ultra Magnus’s cab mode looks spectacular. There’s just something about that classic Convoy design that looks great in any color. White though—white looks super nice.

This toy comes packaged in the currently available Transformers Age of the Primes Target Exclusive 4-Pack. The set doesn’t have a themed name like some have had in the past, or much of a specific theme either. It’s just a neat multi-pack, and I’ve been a big fan of these over the years. It’s one of the things I look forward to each year: Walmart’s exclusive capsule line and Target’s exclusive multi-pack. Well… Walmart kinda crapped their pants with the capsule this year, but Target’s set is another strong one. As with Bumper, whom we talked about last week, Ultra Magnus is another deluxe-class toy from the set. He’s a straight recolor of the Legacy G1 Optimus Prime toy I raved about earlier this year. Since it’s a straight recolor, I’m going to focus on what makes this version different.

One thing I really loved about that Optimus toy was how it remade the original figure with modern engineering, similar to a Masters of the Universe Origins release. It’s such a neat idea; I’d be all for it as the mainstream Transformers line. I know Missing Link is doing that, but I mean as the line available at general retail. It’d be so cool to see recreations of classic toys—considering Generations is mostly updates of those designs anyway, I think it’d be super popular. I’d like to think so, anyway.

Matching his G1 toy’s original deco, Magnus is mostly white with gray and silver parts. Bits of light blue are used throughout, giving him a slightly icy look. Just right for Christmas time. Ultra Magnus has the two different variations of G1 Optimus’s rifle that the base mold came with, now in white. I’ve always preferred the fatter version of the gun and think it looks much better—especially in white. Magnus also has a blue version of the Energon Axe, which is very similar to the Masterpiece MP-2 toy. It matches nicely with the various blue accents on his deco. Also like MP-2, there’s a silver version of the Matrix of Autobot Leadership that fits in his chest. It’s not unheard of for an Ultra Magnus toy to come with the Matrix since they’re often redecos of Optimus, but the silver Origin Matrix works well here. In this context, I like to think it represents the brief time Ultra Magnus carried the Matrix in the 1986 movie.

In truck mode, Magnus is once again a white version of the classic Convoy semi truck—missing his trailer in this release, of course. Like the Optimus toy, his tires are rubber, a nice throwback to the original G1 toy. I know there are issues with rubber tires popping off or dry-rotting with age, but I’ll be damned if they don’t feel nice and give the toy a higher-quality feel. Also like Optimus, Cybertronian Radial 275/80 R22 is molded into the tires. That’s a reference to the fictional tire brand from Transformers Alternators.

It’s been over 20 years and I’m still blown away by Alternators. They may not have been the most fun toys to transform, but they looked amazing. I have nothing bad to say about this toy. I love the idea of it, and I never get tired of cab-mode Ultra Magnus. It’s a great way to enjoy what came before in present-day design, and a solid part of a great 4-pack.

Autobot Bumper [Age of the Primes / Target Exclusive 4-Pack]

"I am the Ghost of Christmas Past."

The grumpy one then made bold to inquire what business brought him there. “Your spark!” said the Ghost. The grumpy one expressed himself much obliged, but couldn’t help thinking that a night of unbroken rest would have been more conducive to that end. The Spirit must have heard him thinking, for it said immediately: “Your reclamation, then. Take heed! For the seeds of the future lie buried in the past."

Bumper is an oddball Transformers who’s been around since the beginning but has only really been a character for about the past 20 years. As has been said more times than necessary, the bulk of the original Transformers toys from 1984/1985 came from Diaclone and Microman molds. Bumblebee and Cliffjumper specifically came from the Microman Micro Change line. They shared engineering — essentially the same toy skeleton with different car parts and robot heads.

Another robot from that Micro Change series was MC-04 Mini CAR Robo 02 Familia 1500XG. Same engineering again, but transforming into a Mazda Familia 1500XG as the name suggests. All of these toys came in multiple colors, but it’s common to see this one in yellow. When the molds were used for Transformers, Bumblebee and Cliffjumper were released in their familiar yellow and red. Though, as many know, reversed-color versions also slipped out. During that weird early era, the Mazda mold ended up released in Cliffjumper packaging in yellow. Rumors persist that it also came in Bumblebee packaging, but no packaged sample has ever surfaced, while Cliffjumper-labeled ones are plentiful.

Plenty of speculation says Hasbro may have intended the Mazda toy to be its own character and that’s what caused the weird release — but nobody knows for sure now. It’s just one of those oddities from the strange early years of Transformers. Multiple toy lines mashed together to create a single brand. It’s been 41 years and we’re still discovering things from that time. The toy was widely known as “Bumblejumper” in the fandom for years, eventually shortened to Bumper by some. During the Dreamwave comics era, he was made an official character and officially named Bumper. Twenty years after being released seemingly by mistake, he finally became part of the team!

Bumper has always been special to me. Not just because getting one back in the day meant a lot, but also because I once had a cat named Bumper. I remember bringing that kitten home from the store, watching him roam around the living room while I tried to think of a name. I wanted a Transformers name… let’s see… Eject… Swerve… BONK! He walked head-first into the wall. Bumper. And that was that. All these years later, Bumper finally gets an official toy actually named Bumper — only his second ever. Imagine how slighted he must feel.

The figure itself is a remold/repaint of Studio Series 86 Bumblebee. I talked about that figure in a prior post, so most of the ins and outs are there, but let’s look at what makes Bumper different. Obviously he has a new head sculpt faithful to the original Micro Change toy. It’s hard to notice without comparing them directly, but he’s a different shade of yellow. Headlights are colored a little differently. His Autobot symbol has a silver border, making it look more like the stickers from the original toys — a nice touch I really appreciate, probably thanks to my early-2000s Mini-Bot obsession. It wasn’t uncommon to see one in my messenger bag back then. These days a Legion/Legend Class Bumblebee lives in my sling bag. Guess some things never change.

When Studio Series Bumblebee released, a lot of fans scoffed at his very angular car mode. Robot mode was perfect, but the car was off-model from the classic VW Bug. As Bumper though, it works so much better. Not exactly a Mazda Familia… but close enough. I really like this toy, and that carries over here. Guess I just like these guys. Bumper has the same gun as Bumblebee, now molded in a gunmetal color. It can store on his backside in car mode. It’s probably no surprise that I like this toy — the base mold is one I already loved, and the old-school fan in me appreciates the new Bumper figure even more. I spent more time looking at the past than the present with this one, but a toy like Bumper is the type that makes you look back.

Skydive [Age of the Primes/Deluxe Class]

In our ongoing quest to complete the Transformers Age of the Primes Aerialbot team of five buttheads, today we’re looking at Skydive! Skydive is the bookworm of the squad — well-versed in aerial tactics, strategy, and history. He's also the most visually distinct member of the team thanks to his mostly black color scheme, compared to the primarily white look the rest of the Aerialbots have going on.

This figure is a remold of the Air Raid toy we looked at a little while back. Honestly, I probably wouldn't have noticed if it hadn’t been pointed out, but side-by-side the shared engineering is clear. Still, the sculpting and new parts are handled so well that it doesn’t feel like the same toy with a new coat of paint. And really, it makes sense to stretch the tooling budget when the original characters themselves shared similar silhouettes in the first place. Skydive and Air Raid have usually been “same shape, different guy,” so this is just accurate to life.

As I’ve been saying with these current Transformers Generations figures — Skydive looks like he stepped right out of the cartoon. Which would be terrifying if he did that while I’m napping during G1 reruns on the Transformers channel. Damn.

Skydive is nicely articulated and comes with two blasters. They work well in robot mode and can also peg under his wings in jet mode. Transformation is quick and easy: legs compress, arms fold in, the backpack settles into place — your standard modern jet-transforming-guy routine. In jet mode, Skydive’s unique colors stand out even more. The darker gray body and lightning pattern on the wings look great, and now that I’m thinking about it, that kind of flashy detail seems to originate back to his G1 toy. I don't remember similar patterns before him, but plenty after. Neat!

Like his teammates, Skydive forms part of Superion — and we’ll take a full look at that combined mode once Fireflight finally joins the squad. These Age of the Primes combiners are a big improvement over the Combiner Wars versions from ten years ago (which I actually liked a lot at the time), so I’m excited to see Superion come together here on Zone Base.

Micronus Prime [Age of the Primes/Deluxe Class]

It's no secret — I love Mini-Cons. Mini-Cons, Micromasters, Battle Masters, Titan Masters, Prime Masters, BotBots… the damn site is named after a Micromaster Base, k? Micronus Prime is where the Mini-Cons began, after all. That's right — they are his Cybertronian descendants, and today we're looking at his most recent toy.

One of The Thirteen Primes highlighted in the current Transformers Generations: Age of the Primes line, Micronus Prime is one awesome toy that's right up my alley. You might ask yourself why such a little guy has a new toy in the Deluxe Class release. Well, that's because he comes with a really cool transforming exo-suit. It's taking a lot for me not to just type "this toy is awesome" over and over again.

Micronus Prime himself is a short, stout little Mini-Con with a good amount of articulation in a mix of translucent and opaque greens and blues. He transforms into a disk that resembles the Mini-Con storage panels from the Transformers Armada cartoon or the data disks characters like Eject and Ratbat turned into in the Fall of Cybertron toy line. These disk modes pop up all over Transformers history — and I always love them. And now that I’m thinking about it, this also feels a bit like the disk alt modes from Robots in Disguise 2015. I liked those too.

Clearly non-descript disk alt modes are my thing.

But the similarities don’t stop there. There's a lot of old toy DNA here, and this post is probably going to go down as the epitome of me comparing new toys to old toys. But that’s what you come to Zone Base for — right? (Unless you're an Amazon seller or someone looking for a firewall, in which case… sorry this keeps happening to you.)

In his disk mode, Micronus Prime fits snugly inside the chest of his exo-suit. It closes up tight, almost completely hiding the little pilot. The exo-suit itself is a pleasant mix of greens, silver, and black. The included Chimera Stone fits onto its chest or Micronus’s back. The suit is nicely detailed and articulated — I’m fond of the gun-barrel hands.

There's strong Pretender shell energy here, with a bit of Transformers Prime Apex Armor influence as well. The armor can be disassembled and connected to other Transformers figures, similar to Siege Weaponizers and their contemporaries. In a further bit of neatness, the armor also transforms into a one-wheeled bike vehicle Micronus can ride. Translucent pilot + power suit + vehicle mode = full-on Microman / Micronauts vibes. This toy’s practically a pocket history of Transformers.

This toy is truly wonderful. I’m honestly having a hard time being critical of it. The closest thing to a flaw I’ve found is that Micronus didn’t fully close into disc mode on mine — even straight out of the package. Not the end of the world, though. I'd also love just a little more paint on the exo-suit to bring out the sculpted detail. And the one-wheeled bike can’t stand up on its own. (I even tried using the Chimera Stone as a kickstand. It did not work.)

But that’s basically it. The positives absolutely outweigh the nitpicks. This thing hits so many of my collecting sweet spots at once. I’m really hoping this mold sees multiple colors and multiple characters — it deserves it. And while I was writing this, I realized the bike mode can kind of be arranged into something vaguely similar to Revenge of the Fallen Demolishor. Probably coincidence, but neat all the same.

Alchemist Prime [Age of the Primes/Deluxe Class]

To be completely honest, I had hardly any interest in Alchemist Prime before buying him. Literally, the only reason I did buy him is the desire to complete the 13 Primes from this series. Neat looking, sure, but eh. Upon opening him, however, and what a great toy! I was truly blown away by just how good of a figure this is. Alchemist Prime has dominion over the elements and legend has it he chose to walk among the mortal Transformers. No bot knows if that's actually true... but rumor has it that Maccadam, whom runs Maccadam's Old Oil House, is actually him. Of course it's silly that the legendary bartender could actually be one of The Thirteen... isn't it?

Isn't it?

Alchemist Prime is a burly hoss of a robot with glasses and a handlebar mustache and beard. He makes me think of various old world characters from TV shows. The design of his body armor even resembles a suit with a vest. He could be working that bar when not up to adventure. Considering his *ahem* magical nature, you can be assured that his stories are beyond your wildest imagination. He's seen Unicron and the Demons that live under the surface and still got that friendly smirk when you ask for another drink. 

It's a good think his figure has so much articulation and is so expressive, because you can tell he talks with his hands. His weapon is a weird one. Clamped on his forearm they make blasters or can be flipped around for energy blades. If the situation calls for it, they can even be held for a more direct attack. If you noticed that there is what appears to be lenses on them, that's because once joined together they form a magical pair of glasses that allow for vision beyond our comprehension. Though any mortal can pick out the ancient Transformers symbols, it's probably best these are left up to the more enlightened to use.

Transformation to vehicle mode is pretty easy, though getting the rear portion exactly in place can be a little fiddly if you've got clumsy fingers. Once done, he's a neat looking heavy duty vehicle of sorts. It looks like an armored Strike-X side by side ATV, and that fits such a fellow whose seen a lot of adventure. The weapons can attach on the roof to provide some vehicular firepower... I'm sure that comes in handy. It's easy to overlook Alchemist Prime with his drab green colors... but their fitting of someone like him. They match his utility vehicle well and carry over to his reserved look. Like I said, I really liked him a whole lot more once the box was opened... wand that is fitting considering how much more there is to Maccadam than meets the eye. It's almost like he's the standard bearer of that old tag line.

Soundwave [Studio Series/Deluxe Class]

Prior to the Bumblebee movie, Dark of the Moon was my favorite of the Transformers live action movies. So various Studio Series releases of the characters from that film tend to catch my eye. The Mrs. probably didn't know that when she picked up this Soundwave for me as a Christmas gift last year. It was originally released in 2019 with a Target Exclusive reissue last year.

I had completely missed out on it's initial release and the universe just made it happen. Neat! Soundwave was pretty cool looking in all his movie appearances, but his DOTM look was really slick. He changes into a licensed Mercedes-Benz SLS AMG, which is a really expensive car. According to Google, in 2011 (when the movie was released) it cost from $169,800 to $275,000. I hope nobody scratched it during filming. 

Yikes.

This is a very well done representation of Soundwave from DOTM, looking like he just walked off the screen and very sleek. He comes with a tiny Laserbeak whom can perch on his arm or top of the car. In robot mode, Soundwave is very articulated and can be put into all sorts of poses. Like all the Bay era film designs, there are a lot of sharp points and edges. These are present... but cast in a softer plastic for safety reasons. He is very well sculpted and there is a lot of detail. More than you'd expect for a standard retail figure. I guess Mercedes had requirements for their licensees.

Transformation is the standard car mode layout you can expect, but man it is a tight fit. There's hardly any wiggle room getting everything into place and that can be frustrating. You might notice in the pics mine doesn't look completely connected in car mode. That's because it isn't, I have no clue what black magic it takes to get everything to align properly, but I gave up after taking too long trying to get everything into place. His robot mode hips are between the forearms in car mode and that tight fit meant something was clearly off just a touch right there and I could not figure it out. Even with some gaps in the panels, that is one sleek looking vehicle. Thanks to various pictures online, I don't have to imagine just how sleeker it is without those hips causing a problem. Despite the frustration, I really enjoy this figure. Studio Series is supposed to be the higher quality representation of the on screen characters and it's shows here.

B-127 [Studio Series/Deluxe Class]

It's a shame Transformers One didn't do as great in the theaters as it's been doing on streaming. Not only was it a great film, but it's got some great toys. I had been putting off getting the Studio Series B-127 for a little while now. Not because I didn't want to get one, but because there was always a lot of them at my stores. So I felt like I could take my time. That turned out to be a good idea as my local Target had him on sale for $12 (which is what a deluxe would have cost in 2012), which was the universe telling me to just buy the thing already. I'm glad I did, because not only was the price great, but the toy is pretty great too. That's the second time I've said something was great and great too. Sometimes you've just got to repeat yourself.

As you already know, this is the Studio Series version of B-127 from Transformers One. As a Studio Series figure, it's nicer than the Prime Changers one I talked about last year. Considering that was already a pretty good toy, nicer should say something. It's more detailed, more solid, more accessories, just better all the way around. Back in the day (and sometimes still today), you'd often see 'STD' and 'DX' on robot toys. It was there to clarify which one was the standard toy (STD) and which was the deluxe model (DX). Studio Series versions are pretty much the DX versions and I'm sure companies have thought twice about putting the term STD on a toy box. B-127 now has more accessories. Instead of just one hand blaster and knife hand attachment, there's two. He's also got a Tracker rifle, one of those generic guns I've been enjoying to talk about with the TF One Blokees. It's neat that he's got so many accessories, as most deluxe class Transformers only have one or two.

He transforms into his Cybertronian car pretty easily, though there is definitely some spots where everything has to be just right. There's just not much wiggle room for error. In car mode he looks as he should, like he did in the movie... which is the point of the figure and how it looks overall. I do like how the weapon storage in vehicle mode makes the car more heavy duty looking overall. It's small, but neat. I wonder who else they could make from this mold that would take advantage of that? I know that I make a lot of comparisons to Microman when talking about modern Transformers, but I feel like one is warranted here. This is another case of the family tree is very evident in the toys design.  I can honestly envision a Takara version using chromed colors (like they did with Transformers Animated) that would make the comparison even stronger. Out of the three B-127 toys I've talked about here, all have been winners. This one is definitely the most premium one of them so far... or should I say DX?

Solus Prime [Age of the Primes/Deluxe Class]

Joining the ranks of the butt heads I talked about last week is Solus Prime, another figure from Transformers Age of the Primes that I had bought and almost forgot about. Solus, like Prima Prime, is a member of The Thirteen. One of the original Transformers made by Primus. Solus Prime's role is maker and creator. With that fancy hammer you see her holding in the pic, she can make just about anything.

The Thirteen Primes are the template for the Transformer race and all female Transformers are based on her. She was also in a relationship with Megatronus Prime, which obviously didn't go as planned. Solus Prime created many of the more powerful and mystical objects in Transformers lore. Personally I think it's cool that they made her a more in depth character and didn't go down a cringe route like often happens with female characters.

Solus, like Prima, has a more fantasy themed appearance. I've always liked when robots are designed with similar cues. Egyptian, Easter Island, Mid-evil, and similar design elements make for an interesting looking character. Solus is pleasantly colored in dark purple armor with gold highlights on her grey robot parts. She's pleasantly articulated, you can even move her dress (is that a dress?) in sections to allow for leg movement. Her hammer can be held by one or both hands, though you'll have to disassemble it first. Solus Prime transforms into a Cybertronian Armored Truck, and that's unfortunately where things go south.

Transformation is not a pleasant experience at all. Honestly, it feels like the alt mode was an after thought. It looks cool, but the shape suggests they initially had something else planned. There's a few spots that feel over complicated for no particular reason. The arms, for example, form the front wheel assembly. By itself it's fine, but there's an odd flat plate in both shoulders that has to be folded into the truck body. I never noticed these panels in either mode and have no clue what purpose they serve. Fitting them into their spot in vehicle mode wasn't easy for my big fingers either.

Then there's the feet. the legs fold up into the rear section of the truck. Like the arms, that's mostly ok, but getting the feet to fold into place is pretty unclear and awkward. Even looking at the instructions, it just doesn't work until miraculously it just does. Of course you'll have to knead the toy a little to get everything to align properly after doing so. It just doesn't seem to work right. The biggest problem that's actually a problem and not subjective is various parts just kept coming off during transformation. The plastic grade on some joints isn't great and various places (like the knees on mine) pop out of place while you're folding them around. It's infuriating. Several others have complained about this online, so I can be assured it wasn't a case of clumsy fingers or QC issues specifically with mine.

Truck mode looks neat, though after the unpleasant transformation it'll take a minute to appreciate. The hammer can attach to the side. You'd think since it can be disassembled that the pieces would be distributed about the mode. That's another thing that makes me think the truck mode wasn't originally intended. She folds up into a shape and there just happens to be truck parts to put into place. The dark purple and gold highlights are dominant in the form and once again look great. It's a very neat looking toy, I just wish the less than stellar transformation didn't overshadow the positives. 

Air Raid [Age of the Primes/Deluxe Class]

Rounding out the second new Aerialbot available as of this writing is Air Raid. Air Raid, like his team mates, is a butt head. He's fearless, reckless, and often in some sort of trouble. While that doesn't sound so fun to most folks, Air Raid couldn't be happier. I've actually got a bit of affinity towards the little shit. When I was younger Air Raid was my first Aerialbot outside of Easter Basket bootleg sets.

I had acquired him for cheap and happy to finally have an official member of the team. Those G1 toys are actually pretty small, and Air Raid found himself in my bag for a little while. I still remember a late night visit to Dunkin Donuts with friends after work with Air Raid getting passed around. Good times.

Air Raid is very faithful to his appearance in the original Transformers cartoon. He's well articulated and just overall pleasant. To be fair, the Aerialbots are pretty plane looking... HAHAHAHAHAHAHAHA *cries*.  Originally, the Scramble City Combiners and Metroplex were designed to be Diaclone toys, but were released as Transformers only. I can see that Diaclone heritage in this Air Raid toy a lot. Makes me wonder what if Transformers never happened. Imagine if Diakron and Kronoform had lived and this was a new updated toy from those series? Air Raid has two blasters that can connect under his wings for alt mode firepower. That's a small thing that's done often... but I like it.

Transformation to his black F-15 Eagle jet mode is pretty easy. Everything just goes into place easily. The only place where you've got to be careful is when folding his legs into the rear of the jet. There's nothing too hard about it, but it's another one of those exactly right or it's not working type spots. It took me a second to get the two sections to snap together out of lack of wiggle room. Not a deal breaker and or a dark spot. Just a brief moment of saying dammit. Air Raid's mix of white, red, and black looks great. It gives a fairly simple looking bot and give him some visual pop. It's funny that a team of butt heads have such simple looking figures. I guess the old mantra 'keep it simple stupid' is always true for a reason. Air Raid looks great in his simplicity and jet mode is fun. Maybe I'll take him with me to Tim Hortons and relive some old memories. My local Dunkin sucks.

Slingshot [Age of the Primes/Deluxe Class]

The other day I was at Walmart with the Mrs and my Mom. When we had walked out to my car, a Slingshot was parked next to us leading my Mom to marvel at how neat it looked. That lead to me remembering the Age of the Prime toys I've been sitting on without posting about.

For example, today we'll be looking at Slingshot the Aerialbot. The Aerialbots, like other classic combiner teams is getting updated with all new and improved toys. It feels like just yesterday that the Combiner Wars version came out... but it sure wasn't. That was 9 years ago. So hey... almost a decade later they're getting updated with new engineering and frankly, they look great!

The Aerialbots are mostly remembered for being butt heads in their initial appearances in the original cartoon. Slinghsot's claim to fame was his adventures with Prince Jumal/Hassan in the episode Aerial Assault. During this episode, the Aerialbots were damaged and got repaired with car parts, leading to Slingshot having an older cars grill for a chest. I think an aftermarket company is making a snap on version of that car grill, which I might be tempted to buy. Slinghsot is also known for his G2 toy being one of the most fragile Transformers ever. It's made of solid gold plastic, which doesn't age well.

Horror stories of fans finding theirs in piles of rubble are well spread. Allegedly newer metallic plastics don't have this problem, but time will tell. Fortunately his newest toy is pretty good. Thanks to advances in toy engineering in the more recent years, the design team is able to make toys that look as if they stepped right off the TV screen. Well, toys that actually physically transform that walked off the TV screen. Slingshot looks like the butt head I just watched the other day. Just so happened Aerial Assault was recently aired on the Transformers Channel. I watch it daily.

In robot mode Slingshot is fairly well articulated. He can be put into a variety of poses and is pretty expressive. It's like the design team made a point to engineer his attitude. He's packing twin double barrel blasted that plug under his wings in jet mode. Transformation is pretty easy and he folds into a jet pretty quickly. Jet mode is the same Sea Harrier you know from his classic appearance. It looks great and is pretty solid. I enjoy how the front landing gear unfolds from the back of Slingshot's head.

Like most jet Transformers, there's a good bit of robot folded under the plane. It's been 41 years, I'm used to it. Thankfully there's not much to really complain about. The bulk of his jet kibble in robot mode is part of his classic appearance. Like I said, transformation is pretty easy. My only gripe is the same I have with a lot of recent cad designed Transformers. There just isn't a lot of wiggle room in the design, so you'll have to get thing exactly right or it's not coming together. Fortunately that wasn't as much of a problem with Slingshot, who being a butt head, you'd expect a little fuss.

G2 Universe Breakdown [Legacy United/Deluxe Class]

Generation 2 recolored versions of Generation 1 characters are always fun due to the loud neon colors. Seemingly the Legacy Stunticons are slowly getting a G2 release as a few of them have been released so far in their respective G2 colors. I'm pretty hopeful for a full team as I missed out on completing the full Legacy set and honestly would enjoy a G2 version better. With Breakdown here, I've gotten all that's been released so far. Go me. Of course the original G2 Stunticons were canceled and the few completed sets out there (from various merchandising samples) are extremely rare and expensive.

Newer Stunticon toys have gotten the G2 treatment over time, especially Breakdown. The original G2 Breakdown toy was the very first BotCon exclusive toy as the convention was given stock produced prior to the teams cancellation. Since then, there's been various G2 versions of Breakdown. Usually with some sort of exclusivity along with it. This version is a general retail toy, but released during the tail end of Legacy. So it still might be tricky for some to get. He was among my birthday presents from the Mrs., so mines extra special to me.

Variations of teal tend to be some of my favorite colors, so it's probably to no surprise that I gravitate towards G2 Breakdown over his original self. This version doesn't feature the Trapper Keeper style graphics the original and a few updates have. That's a little disappointing... but at the same time it looks so sharp that I don't really mind. The teal and purple with black and silver just looks so sharp. Outside of those truly majestic colors, is also a pretty good figure. Normally Combiner limbs are often sacrificed a little as they're a unique type of triple changer. The third mode is a body part, and that leads to robot and alt modes that have to be worked into that shape. Astrotain works because his train mode can be configured into a space shuttle, but how do you get a car into an arm? Thankfully these newer combiners side step that as the main body component member forms something of a skeleton and the limbs just sort of connect into place. This works pretty well and looks great. So we have a Breakdown who manages to be a normally functioning Transformer.

Robot mode is pretty good with plentiful articulation. His car mode kibble mostly resides on the backside of robot mode and is hidden pretty well. The hood forms a backpack that can separate enough as to not be a giant brick on his back. I normally like the backpack look, but can appreciate these improvements that don't block articulation. Breakdown has his usual laser pistol, but the car's spoiler can be held as a weapon too. Frankly it's king of a dumb weapon as he doesn't hold it like a sword... just kind of awkwardly. What the hell is he supposed to do with it? I stuck it on the back of his leg in the picture above as there wasn't much of a place to store it anywhere else. It feels like a design oversight more than an intentional choice. Maybe if it could attach to his forearm it'd be better... how do you even swing that effectively?

Transformation is pretty easy, and like many other car mode Transformers, you can pretty much figure out to do by looking at him. Despite all the folding pieces from the hood, there's not much panel forming and it all just goes into place easily. The pistol stores underneath the car and that spoiler works well as it's intended element. Honestly, it should have been a molded in part that split in half. I'm not ragging on the design, just everything about this toy is pretty great... except that. It just doesn't make sense to me. Remember how much I liked the colors? Well, they continue to look great in car mode. Just look at that damn thing! That's one cool looking car. The black hood and G2 Decepticon symbol on the hood look super sleek making what would normally be considered gaudy colors look very nice. Overall, Breakdown is a pretty solid toy that looks amazing. I'd be happy with him as a stand alone figure, let alone a member of a combiner team. 

Devastation Optimus Prime [Studio Series/Deluxe Class]

Transformers: Devastation was a pretty fun game and now that video game depictions are included in Studio Series, I'm glad to see it included. Admittedly I'm mostly glad to see it included for the character designs than the game itself. They had an almost Studio Ox look to them that I loved and feel like a counter part to the Studio Series 86 series I've been enjoying greatly. I am curious as to why the Devastation figures aren't given the 'Gamer Edition' title like the War for Cyberetron ones were, but I guess this is an easy way to keep them separated.

After all, there's multiple versions of the same character as a gamer edition in Studio Series is obviously going to be confusing. I've been critical of the naming in Transformers, so an attempt to stay simple it is appreciated. Once again, Devastation was a fun game, and the designs make for some nice looking figures. Especially with the cell shaded look from the game being carried over. I love cell shading, it's so pretty.

This Optimus has the unfortunate luck of coming out not long after the more higher end Commander Class Studio Series Optimus Prime, Missing Link Optimus Prime, and even the same price class Legacy Deluxe G1 Optimus Prime. After those toys meant to celebrate the 40th Anniversary, a regular figure is going to get some unfair comparison. Fortunately enough time has passed since those toys that I can look at it with some fresh eyes and appreciate it on it's own merits. Of course when it was announced, I was originally excited for it as I think it resembles a cab mode Ginrai/Powermaster Optimus Prime. That combined with that Studio Ox resemblance and I was sold right off the bat. In robot mode, this is a pretty great toy.

Lot's of articulation and the design just looks great. I appreciate that he has full smoke stacks. Toy safety laws usually have lead to the shortening of the stacks in the past 20 or so years. Obviously if it makes things safer for a child, I'm not taking any issue with it, but it is nice to see a full set. They are removable and look to be the right size to be safe if swallowed. Optimus also has a removable Matrix of Leadership in his chest. I'll never get tired of this gimmick no matter how many times its done. It's unpainted and the same color as the smoke stacks, so I assume they're molded from the same sprue. The Matrix cannot be held unfortunately, that's probably going to be an issue for someone I'm sure. While Optimus doesn't have his trademark Ion Blaster, he does have his Energy Axe. It has a molded in swoosh effect to resemble being swung in the game. It's a neat weapon. 

Transformation is pretty easy and... pretty much the same as other deluxe sized Optimus's. I guess there's no reason to overly complicate it. The truck is fine, though there's no ignoring the cab portion looking a little small compared to the rest of the truck. If there was a trailer, it'd probably look more proportionate. It doesn't bother me, but I'm sure that it gets under the skin of others.

Admittedly I mainly wanted the toy for the robot mode, so there's that. The energy axe can store on the area of the truck the trailer would fit over. I have no clue what that's called. Overall this is a pretty decent Optimus Prime toy. I was happy to see it in my Easter Basket from the Mrs. and have enjoyed it thoroughly. It's a good toy and it looks great. Once again, I really like it's overall visual. I also like Optimus Prime toys, he's a cool looking robot. Here's looking forward to the other Devatration figures.

Optimus Prime [Legacy United/Deluxe Class]

Considering the amount of Optimus Prime toys released a year, you'd imagine it'd be hard to get excited over just one. Well, that's not the case today Zone Base readers, because we'll be looking at the Deluxe Class Optimus Prime from Transformers Legacy United. Similar to Takara's Missing Link Convoy, this Optimus is meant to celebrate the 40th anniversary of Transformers by making a figure that looks like the original, but updated with modern engineering. Think of it as the Transformers version of Masters of the Universe Origins. With this figure we get a toy that looks directly out of 1984 with a lot more articulation.

In all fairness, the original Optimus Prime was fairly possible for a toy of his era. This one, however, is a definite step up. It's fairly identical as well... with some obvious differences. It's a new sculpt... not a 100% match, but really close. Optimus is also a little smaller than the original toy funnily enough. I couldn't tell initially, but it became obvious when compared side by side. Being a standard retail toy, he's all plastic... but does have rubber tires. That's something I didn't expect at all. It's been a while since Hasbro has graced a main line Transformers toy with rubber times and I'm all here for it. It's a superficial touch... but I like it! Neatly enough, the tires are branded CYBERTRON RADIAL 275/80 R22. Cybertron Radials are the brand of tires used on Transformers Alternators. Neat, huh?

Optimus comes with his iconic laser blaster, in fact he comes with two. During the original run, a running change created two versions of the classic gun. Originally a fatter design, later versions got thinner (ozempic works on plastic?) as time went. My original had the fatter gun, but some reissues came with the skinny one. This initially confused me as I wasn't aware that there was a variation. There I was with a reissue and hey... the gun looked different. These days I've got quite a few reissues and there's been some variation in those guns over the years. That's why I'm glad he comes with both. That way whichever one came with yours, he cane use. One can store on his back as well, which looks pretty cool. His smoke stacks can also be held as guns, which is a fun little touch.

Speaking of pretty cool, Optimus has that energy axe he's become known for using since More Than Meets the Eye episode 2. This axe is specifically based on the version that was packed with The Transformers Collection Convoy reissue. He's also got a Autobot Matrix of Leadership that can be stored in his chest (but not held) that's specifically modeled after the Matrix that came with the 2002 New Years Special reissue. I love how this toy homages so many things from prior toys without being completely obvious about it.

Optimus is very well articulated, something that isn't obvious at first glance. He looks so much like the original toy that I wouldn't be surprised if he was mistaken for it. He almost transforms like the original as well. Most noticeably, the hands fold inside of his forearms instead of being removed and probably lost under the couch. Guns and axe easily store in vehicle mode and everything is nice and compact. It's pretty obvious that there's no included trailer. I'm hoping a future edition will be released with one. That'd be perfect. He is compatible with the Earthrise and Original Optimus Prime trailers. Potentially with others, but those are the ones I know for certain work. The Earthrise works best as his slightly smaller size makes the G1 trailer comically huge. Overall, this is a very neat toy that I'm very happy to own. I look forward to buying every ridiculous reuses of it in the future. 

Cannonball [Star Raiders Collection/Deluxe Class]

I've been a big fan of the Walmart Exclusive Transformers Legacy series as they're just so cool. Somehow, I've hardly covered them here on the site until the Star Raider Collection, which I've managed to completely showcase. That was a weird way to reflect on the series while also acknowledging that today's space pirate is the last of the series. Like Lockdown, Canonball was a Christmas gift from the Mrs. who spoils me every year.

Cannonball has pretty much always been a pirate character, though his crew tends to change depending on fictional setting. As a toy, he's always been a repaint. The original was a repaint of the Deluxe Cybertron Red Alert figure. This new one is the latest use of the Legacy Skids mold. That mold itself has seen more miles than a long haul tractor trailer with multiple repaints and remolds. Cannonball specifically is a repaint/remold of Crankcase. I have Crankcase, but don't think I've covered him here. Despite the reuse of prior molds, Crankcase and Cannonball almost feel like completely different engineering. There's only been two Cannonball figures, but ironically he's been a Walmart exclusive twice. The original was reissued in an exclusive set, while this new figure is from the Star Raiders collection.

Cannonball is very similar to his original design, but now turning into a crossover style SUV while the original was a Dodge Magnum. Which was a station wagon that was pretty popular at the time. Cannonball has a new head that looks almost just like the original as well as the original's laser hand. There's a claw and hammer accessory that can fit on the laser hand and store in his legs. He's holding the hammer in my pic as I wanted to show it off, but apparently in not the very best way. One nice touch is the Cyber Key. It doesn't unlock anything... but is a nice nod to the past. The key is sporting a Star Seeker insignia, and that's really cool.

Another nice touch is the skeleton graphics on the original toy's car doors are replaced with a Vok one. The Vok resemble a flaming skull, so it's a really nice Easter Egg. Like all the other instances of this mold, like Burn Out, transformation is easy and articulation is plentiful. It's really neat how much this toy looks like the original. The Star Seeker Collection was fun to collect as was the exclusive sets prior. I'm sad to see it over, but as Cannonball was originally a Cybertron toy, I feel like him ending this series makes a nice segway to this years Walmart set. An all Cybertron themed collection to celebrate the series 20th anniversary. So look forward to more Cyber Key action later this year!

Optimus Prime (EarthSpark/Deluxe Class)

At some point I got over my initial irritability over price points in EarthSpark and decided to get the Deluxe Class figures. As of this writing, I just need Starscream to have all the Mandroid build-a-figure parts. Neat! This figure of Optimus is a very good representation of Optimus Prime as he appears on the EarthSpark cartoon. Thankfully, however, his face plate is up. Interestingly, this Optimus figure is a heavy remolded version of the Cyberverse Deluxe Class Optimus Prime figure. Sharing essentially the same 'skeleton' , but with new robot and truck parts. I never got that Optimus, so I can't compare the two in person. If this information wasn't made known to me, I'd never been able to tell. Optimus transforms into a semi-truck as you'd expect.

Optimus transforms fairly easily. Aside from getting his legs in just the right spot, I practically did it purely from muscle memory of other Optimus Prime toys. This is generally a pretty standard toy of him. Thankfully, it's also a pleasant toy of him. Featuring a fair amount of articulation and a very traditional looking rifle and energy axe, Optimus is ready to fight! The rifle and axe store away very conveniently in truck mode, which is something I just love. Honestly this is a pretty predictable Optimus Prime figure. It's pretty much what you expect. However, it's a good figure of Optimus Prime as he appears in the EarthSpark cartoon. So I can't complain. The Hasbro release comes with a Mandroid part, though I'm hearing newer found copies don't now. I'll need to find that Starscream sooner than later. Like other EarthSpark toys, the Takara version doesn't have the Mandroid part, but a more show accurate deco. 

Terran Nightshade (EarthSpark/Deluxe Class)

Nightshade is a unique figure as they don't specifically transform into an owl, but a statue of one. This ties into the show where the various Terrans took their time to pick an alt mode and went with one that they felt fit them. As a long time fan of this sort of thing, that's funt. It gives a different look into the characterization of Transformers. Normally we'd just accept that Bumblebee was a car or Starscream a jet. Nightshade chose an owl statue from a book series they liked. Not to mention, the statue was in a cemetery. Nightshade's colors match that really well. Spooky Season may be over, but Christmas time is for scary ghost stories and it's fun to think Ebeneezer was right around the corner in that cemetery.

Nighshade is a pretty well done figure that closely matched their appearance on the show. I say closely as you'd have to remove the beast mode wings to really nail is and due to the plastic quality of them... that's not super recommended. They'd break after a few times. Fortunately I really like the winged look in robot mode. It works well overall with the statue flavoring of the toy... and the wings just look cool. In addition, Nightshade comes with a neat pair of knives and a Mandroid part. Initially I wasn't planning to complete Mandroid... but I've changed my mind. I've got a good bit of him now and it'd be fun. I don't think the Takara Tomy versions of these come with the Mandroid parts, but they have slightly different decos. Nightshade is more show accurate in the Takara Tomy release, but it's not that different from the Hasbro version in my opinion. 

Transformation was very easy for me. Everything just folded away and Nightshade turned into a statue of an owl. Those cool knives fit into the owl's wings neatly and everything just works well. As a robot, Nightshade is fairly articulated and the same could be said for the owl form. That cool green looks great in both modes and brings out some well done sculpting. This is certainly a toy full of character. Part of me wishes to see a repaint as Hoot from Convertors, but that'd never happen. Like Twitch (who I just realized hasn't been covered here yet... dang it), Nightshade's robot mode gives me strong Microman/Micronaught vibes. That's neat, I like the similarities even if they're probably unintentional. Nightshade is a really cool toy. I think my only complaint is their hands. They too small. That's probably a necessity, but I'd like them a little heftier. If a minor nitpick is my only complaint, then there's nothing to really complain about. Neat toy.